JHPK-ⅢB型聚氨酯高压无气喷涂(浇注)成型系统，采用美国著名品牌部件，从而确保双组份原料所需的混合压力；分别为2500w的独立加热器，为原料提供可靠的加热源，从而有效的解决了原料的粘度问题；15米的加热保温管路确保所加热的原料热量不散失；无需溶剂的喷枪清洗系统，使您的操作、维护更轻松。
JHPK-IIIB ,High-pressure Polyurethane Spray and Perfusion Equipment.The parts of the equipment are from America making sure the pressure is enough for mixing the double component materials together.It has the separate heater which is 2500 watt;provides the reliable heat source for the row materials.The pipe of heating and preserved is 15 meters and it preserves the heat energy of the materials.The system of spray gun with non-solvents washing makes the machine easy to operate,and maintain.
| 标准配置： | Standard Configuration: |
|---|---|
|
主机：1台
喷枪：1把 加热保温管路：15米 联枪短管：1.5米 供料泵：2只 |
Mainframe: 1 set
Spray gun: 1 set Heating and preserved pipe: 15m Connecting pipe for spray gun: 1.5m Max.Pipe length:45m Transfer pump: 2 sets |
| 技术参数： | Technical Parameter: |
|
电 源：单相 220V 7000W 50Hz
气 源：7-11kg/cm2 0.9m3/分钟 原料输出量：8kg/分钟 原料加热功率：2250W×2 管路加热功率：2000W 单组分原料压力：75-90kg/cm2 |
Electrical source: 220v 7000w
Air source:0.5~0.8Mpa(70~120psi) ≥ 0.9m3/min Output: 4~8kgsmin Heating device power for material: 2500w ×2 Heating power for pipe heating: 2000w Single component output pressure: 5~10Mpa (700~1500psi) |
| 装运参数： | Technical Parameter: |
|
重量：150kg
体积：800×700×1100(mm) |
Weight: 150kgs
Volume: 800x700x1100(mm) |
